bridge question

From: Matt Lachberg 3 (Cisco@xxxxxxxxxxxxxx)
Date: Mon Aug 14 2000 - 13:36:25 GMT-3


   
Will this configuration bridge on Ethernet 0 or must I add "no ip routing"
globally in order to enable bridging?

interface ethernet 0
 no ip address
 bridge-group 1
!
 bridge-group 1 protocol ieee

Matthew Lachberg, CCNP, CCDP, MSCE



This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:25 GMT-3