From: Simon Hopkins (simon@xxxxxxxxxxxxx)
Date: Mon Aug 14 2000 - 17:28:35 GMT-3
If you are using Inverse ARP the spokes will only pick up the hub - it works on
a link basis only. The spokes therefore need a static map to reach the other
spoke. Try using "debug ip packet" and see if you are getting "encapsulation
failed".
Brian S turner wrote:
> Apple local routing global command
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> dongbiao lee
> Sent: Thursday, August 10, 2000 9:24 PM
> To: ccielab@groupstudy.com
> Subject: An Appletalk question?
>
> When I use the Appletalk eigrp over NBMA, i config the hub using multipoint
> subinterface and spokes without subinterface. And i use no appletalk
> eigrp-splithorizon in the subinterface in th hub.One spoke can't ping the
> other spoke. Why?
>
> dongbiao lee
> dongbiao@yeah.net
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:25 GMT-3