From: Robert LaGrasse (rlagras1@xxxxxxxxxxxxxxx)
Date: Sat Aug 12 2000 - 18:57:38 GMT-3
If you wanted to be absolutely sure, you could link the routers
together on ethernet and use a pc based analyzer to look at the
traffic...
-----Original Message-----
From: John Conzone <jkconzone@home.com>
To: ccielab <ccielab@groupstudy.com>
Date: Saturday, August 12, 2000 2:57 PM
Subject: encryption
I've set up a basic DES encryption between tow routers, and have
checked the connection. It appears to be up.
r2#sho crypto cisco connections
Connection Table
PE UPE Conn_id New_id Algorithm Time
12.12.12.1 11.11.11.1 1 0 DES_56_CFB8 Mar 01 1993
00:18:37
flags:TIME_KEYS ACL: 101
I am able toping between the two routers. I've looked in the IOS
but cannot find a way to make sure that my access list is working. In
other words, I have a serial link beween r1 and r2. r1 is 10.10.10.1
and r2 is 10.10.10.2. I've created a loopback on each. On r1,its
11.11.11.1 and r2 its 12.12.12.1. My access list allows 11.11.11.1 to
12.12.12.1 on r1, and the reverse on r2.
How do I know that my pings (they work) are getting encrypted
beside logging on the access-list? The log shows the access list
getting hit, so am I to a assume its encrypted?
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:24 GMT-3