From: Eric Fairfield (ericfair@xxxxxxxxxx)
Date: Tue Aug 08 2000 - 18:34:52 GMT-3
You are pointing to the LES not the LECS address on your LS1010. Your show
lane client is showing a LECS attempt via the well-know address.
----- Original Message -----
From: Aaron DuShey <aaron.dushey@dushey-consulting.com>
To: CCIE (E-mail) <ccielab@groupstudy.com>
Sent: Tuesday, August 08, 2000 3:11 PM
Subject: help-argh-ls1010 lane to 7200 atm
> I can't get lane to work? Can you tell me what I am missing? I am burning
> out on ATM here-
> 7200 ATM interface plugged into atm0/0/0 on LS1010.
> thanks
>
> r7#sh lane def
> interface ATM4/0:
> LANE Client: 47.00918100000000100745B101.00107967AC20.**
> LANE Server: 47.00918100000000100745B101.00107967AC21.**
> LANE Bus: 47.00918100000000100745B101.00107967AC22.**
> LANE Config Server: 47.00918100000000100745B101.00107967AC23.00
> note: ** is the subinterface number byte in hex
>
> r7#sh lane data
>
> LANE Config Server database table 'Mylecs' bound to interface/s: ATM4/0
> no default elan
> elan 'ELAN1': un-restricted
> server 47.00918100000000100745B101.00107967AC21.01 (prio 0)
>
> r7#sh lane client
> LE Client ATM4/0.1 ELAN name: ELAN1 Admin: up State: initialState
> Client ID: unassigned Next join attempt in 93 seconds
> Join Attempt: 29
> Last Fail Reason: Config VC being released
> HW Address: 0010.7967.ac20 Type: ethernet Max Frame Size:
1516
> ATM Address: 47.00918100000000100745B101.00107967AC20.01
>
> VCD rxFrames txFrames Type ATM Address
> 0 0 0 configure
> 47.007900000000000000000000.00A03E000001.00
> 0 0 0 direct
> 00.000000000000000000000000.000000000000.00
> 0 0 0 distribute
> 00.000000000000000000000000.000000000000.00
> 0 0 0 send
> 00.000000000000000000000000.000000000000.00
> 0 0 0 forward
> 00.000000000000000000000000.000000000000.00
>
> r7#sh run
> Building configuration...
>
> Current configuration:
> !
> version 11.3
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> !
> hostname r7
> !
> !
> ip subnet-zero
> no ip domain-lookup
> !
> lane database Mylecs
> name ELAN1 server-atm-address
47.00918100000000100745B101.00107967AC21.01
> !
> !
> interface Loopback0
> ip address 177.1.1.1 255.255.255.0
> !
> interface FastEthernet0/0
> no ip address
> shutdown
> !
> interface Serial1/0
> ip address 12.2.1.2 255.255.0.0
> ip ospf message-digest-key 10 md5 cisco
> ip ospf cost 25
> ip ospf hello-interval 45
> ip ospf retransmit-interval 10
> no ip mroute-cache
> no fair-queue
> !
> interface Serial1/1
> no ip address
> shutdown
> !
> interface Serial1/2
> no ip address
> shutdown
> !
> interface Serial1/3
> no ip address
> shutdown
> !
> interface Ethernet2/0
> ip address 12.3.1.1 255.255.0.0
> !
> interface Ethernet2/1
> ip address 12.4.1.1 255.255.0.0
> !
> interface Ethernet2/2
> no ip address
> shutdown
> !
> interface Ethernet2/3
> no ip address
> shutdown
> !
> interface ATM4/0
> ip address 10.1.1.2 255.255.255.0
> atm pvc 1 0 5 qsaal
> atm pvc 2 0 16 ilmi
> lane config auto-config-atm-address
> lane config database Mylecs
> !
> interface ATM4/0.1 multipoint
> lane server-bus ethernet ELAN1
> lane client ethernet ELAN1
> no cdp enable
> !
> router ospf 2
> network 0.0.0.0 255.255.255.255 area 0
> area 0 authentication message-digest
> !
> ip classless
> !
> !
> !
> line con 0
> exec-timeout 0 0
> line aux 0
> line vty 0 4
> password cisco
> login
> !
> end
>
> r7#
> r2#2
> [Resuming connection 2 to ls1010 ... ]
>
> ls1010#sh run
> Building configuration...
>
> Current configuration:
> !
> version 11.3
> no service pad
> no service password-encryption
> !
> hostname ls1010
> !
> !
> !
> atm lecs-address-default
47.0091.8100.0000.0010.0745.b101.0010.7967.ac21.00
> 1
> atm address 47.0091.8100.0000.0010.0745.b101.0010.0745.b101.00
> atm router pnni
> node 1 level 56 lowest
> redistribute atm-static
> !
> !
> interface ATM0/0/0
> no ip address
> !
> interface ATM0/0/1
> no ip address
> !
> interface ATM0/0/2
> no ip address
> !
> interface ATM0/0/3
> no ip address
> !
> interface ATM0/1/0
> no ip address
> !
> interface ATM0/1/1
> no ip address
> !
> interface ATM0/1/2
> no ip address
> !
> interface ATM0/1/3
> no ip address
> !
> interface ATM2/0/0
> no ip address
> atm maxvp-number 0
> !
> interface Ethernet2/0/0
> no ip address
> !
> ip classless
> !
> line con 0
> line aux 0
> line vty 0 4
> login
> !
> end
>
> ls1010#
>
> Aaron DuShey-
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:22 GMT-3