From: Scott (trig@xxxxxxx)
Date: Mon Aug 07 2000 - 18:58:51 GMT-3
Hello group
I have a question a customer of mine stumped me with. He asked if the frame
relay encapsulation could be diffirent on subinterfaces from the main
interface. I said yes they could as long as you specified it after the DLCI
statement. He asked me why when you do a "show interface ser 0.1" it always
shows the same encapsulation that the main interface has even though you
specify a diffirent one on the subinterface. I tested it out and he is right.
If you put encap IETF on the main interface and Cisco on the subinterface
(frame-relay interface-dlci 16 cisco) a show interface on the sub interface
will show it as "frame encap IETF" and vis versa. Irregardless of what encap
you can still ping accross the PVC as long as both sides are Cisco (at least
in back to back serario) another thing I thought was not possible since there
are slight diffirences in the frame.
Is this a cosmetic bug with the output of "show int" or was I wrong about the
sub interfaces being able to be a diffirent encap then the main interface?
Thanks!
Scotty
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:22 GMT-3