From: Scott Morris (smorris@xxxxxxxxxxxxxx)
Date: Sun Jul 30 2000 - 23:27:48 GMT-3
No, it's not true.
Or, I should say, if you don't do anything out of the ordinary, it won't
work...
But like any protocol on a multipoint interface, if you "frame-relay map
clns ...." then you can point your nsap addresses to dlci's and it'll work
just fine then.
Scott Morris, MCSE, CNE(3.x), CCDP (R&S), CCIE (R&S) #4713, Security
Specialization, CCNA - WAN Switching
CCSI #21903
smorris@ccci.com
----------------------------------------------------------------------------
------------------------------
Mentor Technologies Group, Inc. http://www.mentortech.com
Formerly Chesapeake Network Solutions http://www.ccci.com
Cell Phone: 941-350-8590 e-mail:smorris@mentortech.com
Pager: 800-490-1326 Fax: 606-225-8403
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Timur.Mirza@Notes.airtouch.com
Sent: Sunday, July 30, 2000 9:06 PM
To: ccielab@groupstudy.com
Subject: is the following true?
you cannot establish clns is-neighbor adjacencies over point to multipoint
networks (they must be pt2pt)
i had heard an instructor say this in a practice lab session & it sounds
like
its true bec/ i cannot establish an adjacency across a frame relay
multipoint
connection...timur
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:59 GMT-3