RE: ISIS inarp issue...

From: Feliz, Edgar (Edgar.Feliz@xxxxxxxx)
Date: Sun Jul 30 2000 - 11:07:55 GMT-3

• Next message: Scott: "IPX Over ISDN"
• Previous message: Simon Baxter: "OSPF Default Information"
• Maybe in reply to: Ryan Hoffman: "ISIS inarp issue..."
• Next in thread: D. J. Jones: "Re: ISIS inarp issue..."
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
You can not have both CLNS, and ISIS configured on an interface at the same
time.

EF

-----Original Message-----
From: Ryan Hoffman [mailto:ryan.hoffman@telus.com]
Sent: Monday, July 24, 2000 9:49 PM
To: 'ccielab@groupstudy.com'
Subject: ISIS inarp issue...

Caslow pg 111 indicates fr inarp for iso clns is supported. I can't get the
following to bring up dynamic map entries. Is it supported for osi clns
routing only, not isis?

hostname r1
!
interface Serial0
 ip address 10.0.3.1 255.255.255.248
 encapsulation frame-relay
 ip router isis
!
router isis
 net 05.0000.0000.0001.00

hostname r3
!
interface Serial0
 ip address 10.0.3.3 255.255.255.248
 encapsulation frame-relay
 ip router isis
!
router isis
 net 05.0000.0000.0003.00

• Next message: Scott: "IPX Over ISDN"
• Previous message: Simon Baxter: "OSPF Default Information"
• Maybe in reply to: Ryan Hoffman: "ISIS inarp issue..."
• Next in thread: D. J. Jones: "Re: ISIS inarp issue..."
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:59 GMT-3