From: David C Prall (dcp@xxxxxxxxxxx)
Date: Fri Jul 28 2000 - 13:22:07 GMT-3
> I'm looking into getting an AGS+ to use as a frame switch but the
hardware
> configuration is obviously lightyears different than what I'm used to.
Many
> of the boxes on ebay are coming with 25 pin serial connections. Are
these
> standard serial connections and can I get cables to go from that to
one of
> the compressed 50 pin serial connections on a 2500? Also, anything
special
> I need to know about minimum required management cards? Any other
caveats I
> should be aware of? Thanks for the help!
>
> Scott Brooke
>
Makesure that it has the CSC/4 processor and MC+ Flash card. Get a sh
ver so you can see that it has 16MB of Ram and 4MB of Flash. You'll need
a CSC-4T at a minimum. The Applique's have HD26 connectors, you can
purchase the DCE v.35 Female cables from Pacific Cable
http://www.pacificcable.com, they will also make back-to-back cables for
you but I have found the double cables very useful on occaision.
David C Prall dcp@dcptech.com http://dcp.dcptech.com
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:59 GMT-3