From: Art Davis (senzaart@xxxxxxx)
Date: Fri Jul 28 2000 - 15:49:16 GMT-3
You'll need special AGS-to-2500 cables... I got mine at
http://www.pacificcable.com
My ebay-bought AGS has 8 serial ports, 4 TR, and 2 ethernet... works great!
Get the CSC4 card and 16 MB Ram and version 11.0... 9.x is a little awkward to
move around in. There's lots more info in the archives.
Art
sbrooke@atlmedia.com (Scott Brooke) wrote:
I'm looking into getting an AGS+ to use as a frame switch but the hardware
configuration is obviously lightyears different than what I'm used to. Many
of the boxes on ebay are coming with 25 pin serial connections. Are these
standard serial connections and can I get cables to go from that to one of
the compressed 50 pin serial connections on a 2500? Also, anything special
I need to know about minimum required management cards? Any other caveats I
should be aware of? Thanks for the help!
Scott Brooke
Arthur Davis
Network Engineer
Altra Energy Technologies
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:59 GMT-3