From: Brian Hescock (bhescock@xxxxxxxxx)
Date: Thu Jul 27 2000 - 10:30:12 GMT-3
You should be able to set the metric when you redistribute or set the
default metric when you redistribute. You could say the metric is 5 so
then the max hop count from that point would be 10. Another option may be
to use a route-map to change the metric.
Brian
On Thu, 27 Jul 2000, Dave Gingrich wrote:
>
> Is it possible to set or alter an IPX RIP hop count value? IPX RIP will
> not advertise any routes with a hop count > 15, but how can one
> artificially change (lower) the value. There appears to be no mechanism
> allowing this to be set, even when redistributing from IPX EIGRP.
>
> The command ipx maximum-hops allows EIGRP or NLSP to accept routes with a
> hop count > 15, but it doesn't affect RIP.
>
> -Puzzled
> =====================
> Dave Gingrich, K9DC
> Indianapolis, Indiana
> Dave@dcg.org
> =====================
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:58 GMT-3