From: Dave McFetridge (dmcfetridge@xxxxxxxxxx)
Date: Wed Jul 26 2000 - 16:26:15 GMT-3
I was told I could simulate SNA traffic using dspu to test my dlsw
config/filters.
Has anyone tried this?
Here is a sample of what I tried.
R1:
source-bridge ring-group 500
dlsw local-peer peer-id 172.16.64.1 group 40 promiscuous
dlsw remote-peer 0 tcp 172.16.104.1
!
dspu pu HOST rmac 0000.303a.1f1f rsap 4 lsap 4
!
interface TokenRing0 mac address 0007.0dc6.2d52
ip address 172.16.64.1 255.255.255.0
ring-speed 16
source-bridge 50 1 500
dspu enable-pu lsap 4
dspu start HOST
R2
source-bridge ring-group 500
dlsw local-peer peer-id 172.16.104.1 group 40 border promiscuous
dlsw remote-peer 0 tcp 172.16.64.1
!
dspu host HOST xid-snd 0d0d50d0 rmac 0007.0dc6.2d52 rsap 4 lsap 4
!
interface TokenRing0 mac address 0000.303a.1f1f
ip address 172.16.104.1 255.255.255.0
ring-speed 16
source-bridge 50 1 500
dspu enable-host lsap 4
dspu start HOST
When I use NetBeui workstations and do a find computer it works and my dlsw
circuits connect fine so I know the dlsw is working.
Thanks in advance....
Dave McFetridge
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:58 GMT-3