From: Sawal, Vijay (Vijay.Sawal@xxxxxxxxx)
Date: Wed Jul 26 2000 - 14:36:44 GMT-3
Can I do this manual aggregation at the two ISP exit Routers?
-----Original Message-----
From: Rogell, Dennis [mailto:Dennis_Rogell@milgo.com]
Sent: Wednesday, July 26, 2000 1:26 PM
To: 'Sawal, Vijay'
Subject: RE: BGP route aggregation and redistribution
If you want to only advertise the aggregate use aggregate address summary
only this will advertise the aggregate only.
hope this helps
Dennis Rogell
> -----Original Message-----
> From: Sawal, Vijay [SMTP:Vijay.Sawal@CWUSA.COM]
> Sent: Wednesday, July 26, 2000 09:57
> To: 'ccielab@groupstudy.com'
> Subject: BGP route aggregation and redistribution
>
>
> How can I advertise Customer BGP network into the Internet cloud via two
> exit points of the same ISP. And the Customer networks should not be
> advertised beyond /24. Unfortunately aggregation
> is not possible for all the Customer routes at the Customer Router.
>
> Can I use a Route-map for outgoing BGP updates? Or Do I have any elegant
> solution?
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:58 GMT-3