From: John (veryconnected@xxxxxxxxx)
Date: Wed Jul 26 2000 - 12:09:31 GMT-3
I'm pretty sure there's a command
async default-routing the dynamic routing I think
will try and use a routing protocol over the link.
--- Geatti <geatti@home.com> wrote:
> I have a couple of modems hanging off two of my
> routers going through a pots
> simulator. I have the line responding to interesting
> traffic (IP) but can't
> seem to get routing working over the line. What am I
> overlooking? Async line
> configs below. I can ping but can't route over the
> interfaces?? Appreciate
> any help as I am stuck and have no hair left.
>
> R3 config
>
> interface Async1
> ip address 10.10.10.1 255.255.255.0
> ip directed-broadcast
> encapsulation ppp
> dialer in-band
> dialer idle-timeout 200
> dialer map ip 10.10.10.2 name R2 modem-script fred
> broadcast 40
> dialer-group 1
> async dynamic routing
> async mode dedicated
> ppp authentication chap
>
> R2 config
>
> interface Async1
> ip address 10.10.10.2 255.255.255.0
> encapsulation ppp
> async dynamic routing
> async mode dedicated
> dialer in-band
> dialer map ip 10.10.10.1 name R3
> ppp authentication chap
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:58 GMT-3