From: kongck (kongck@xxxxxxxxxxxxxx)
Date: Wed Jul 26 2000 - 02:35:43 GMT-3
maybe u should use "dlsw timers explorer-wait-time " ,it causes DLSw+ to
wait the specified amount of time before selecting a peer to use for
connections.
> Hi,
> For r4, I have two dlsw peers r1 and r2, the reachability to a
ethernet of r1 and r2 is the same,such like:
>
> PC-SERVER FOUND REMOTE 1.1.1.1(2065)---------->r1
> 2.2.2.2(2065)------------>r2
>
> but peer cost to r1 is 1,and peer cost to r2 is 5.
>
> In my opinion, circuit should be
> established between r4 and r1,when i use netbios to test the reachability
from r4,but
> the circuit is established between r4 and r2,why?
>
> r4#show dlsw circuit detail
> Index local addr(lsap) remote addr(dsap) state
uptime
> 1610612771 0003.3001.18cf(F0) 0005.93c1.44b4(F0) CONNECTED
00:00:48
> PCEP: 9DC644 UCEP: 9EE730
> Port:TB1 peer 2.2.2.2(2065)
> Flow-Control-Tx CW:20, Permitted:34; Rx CW:20, Granted:21; Op:
Repeat
> Congestion: Low(02), Flow Op: Half: 0/0 Reset 0/0
> RIF = --no rif--
> Total number of circuits connected: 1
>
>
> Jansen
> jysh@teamsun.com.cn
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:58 GMT-3