From: Jansen (jysh@xxxxxxxxxxxxxx)
Date: Tue Jul 25 2000 - 03:28:31 GMT-3
Hi,
For r4, I have two dlsw peers r1 and r2, the reachability to a ethernet o
f r1 and r2 is the same,such like:
PC-SERVER FOUND REMOTE 1.1.1.1(2065)---------->r1
2.2.2.2(2065)------------>r2
but peer cost to r1 is 1,and peer cost to r2 is 5.
In my opinion, circuit should be
established between r4 and r1,when i use netbios to test the reachability from
r4,but
the circuit is established between r4 and r2,why?
r4#show dlsw circuit detail
Index local addr(lsap) remote addr(dsap) state uptime
1610612771 0003.3001.18cf(F0) 0005.93c1.44b4(F0) CONNECTED 00:00:48
PCEP: 9DC644 UCEP: 9EE730
Port:TB1 peer 2.2.2.2(2065)
Flow-Control-Tx CW:20, Permitted:34; Rx CW:20, Granted:21; Op: Repeat
Congestion: Low(02), Flow Op: Half: 0/0 Reset 0/0
RIF = --no rif--
Total number of circuits connected: 1
Jansen
jysh@teamsun.com.cn
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:58 GMT-3