From: dave.awatere@xxxxxxxxxx
Date: Mon Jul 24 2000 - 17:40:01 GMT-3
Can you post your R4 ospf redistribute config line.
R\Dave
"John Conzone" <jkconzone@home.com>@groupstudy.com on 07/25/2000 07:59:45 AM
Please respond to "John Conzone" <jkconzone@home.com>
Sent by: nobody@groupstudy.com
To: "ccielab" <ccielab@groupstudy.com>
cc:
Subject: RIP to OSPF vs. EIGRP to OSPF redistribution
I have 4 routers running OSPF. Router 1 is in area 0, router 2 is area 0
and area 10, and routers 3 and 4 are connected to 2 by frame and are in area
10. Area 10 is NSSA no summary. Router 3 is a RIP ASBR and router 4 is an EIGR
P
ASBR. Here's what I'm seeing.
All the NSSA stuff is good on router 3. I put the ethernet and a loopback
in RIP, redistribute RIP into OSPF, and the RIP routes show up in the other
area 10 routers as N2, and the area 0 router as E2. I can summarize at router
3
and the RIP routes appear as the summary E2 in 1. Great.
Now, when I go to router 4, which is the EIGRP ASBR, and redistribute EIGR
P
into OSPF, they don't show up. When I redistribute connected they appear as N2
in the area, E2 outside the area and can be summarized.
Both the RIP and EIGRP routes appear in their respective routers as
connected. Why does the RIP redistribution work but the EIGRP not and I have t
o
use connected? I'm missing somethig basic here, I know.
Thanks!
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:57 GMT-3