From: John Conzone (jkconzone@xxxxxxxx)
Date: Mon Jul 24 2000 - 16:59:45 GMT-3
I have 4 routers running OSPF. Router 1 is in area 0, router 2 is
area 0 and area 10, and routers 3 and 4 are connected to 2 by frame
and are in area 10. Area 10 is NSSA no summary. Router 3 is a RIP ASBR
and router 4 is an EIGRP ASBR. Here's what I'm seeing.
All the NSSA stuff is good on router 3. I put the ethernet and a
loopback in RIP, redistribute RIP into OSPF, and the RIP routes show
up in the other area 10 routers as N2, and the area 0 router as E2. I
can summarize at router 3 and the RIP routes appear as the summary E2
in 1. Great.
Now, when I go to router 4, which is the EIGRP ASBR, and
redistribute EIGRP into OSPF, they don't show up. When I redistribute
connected they appear as N2 in the area, E2 outside the area and can
be summarized.
Both the RIP and EIGRP routes appear in their respective routers
as connected. Why does the RIP redistribution work but the EIGRP not
and I have to use connected? I'm missing somethig basic here, I know.
Thanks!
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:57 GMT-3