From: Padhu@xxxxxxxxxxxx
Date: Thu Jul 20 2000 - 22:14:33 GMT-3
Hi,
Pretty basic isdn setup.
show sidn status shows phy layer active and multiframe established.
switch type is basic-5ess. so i don't have any SPIDs configured.
actually tried removing dialer-group from the remote end and had it only on
the local; so that the calls are initiated only from chicago side.
that didn't help either.
This is the first time i am ordering an ISDN ckt ..Is there something i
should have asked for from the Telco ?
The bearer capability i see is 0x8890 ..I am gonna lookup on CCO ..Does this
imply they have the ckt for data or voice ?
This is the main error i see when i try to ping the remote routers
bri i/f 's IP.
> Cause i = 0x8295 - Call rejected
Appreciate any inputs on this .
Thanks .
Cheers,Padhu
chicago :
>hostname chicago
>!
>username newyork password 0 cisco
>isdn switch-type basic-5ess
>interface BRI0
> ip address 172.25.66.1 255.255.255.252
> encapsulation ppp
> dialer map ip 172.25.66.2 name newyork broadcast 13122010014
> dialer map ip 172.25.66.2 name newyork broadcast 13122010015
> dialer-group 1
> ppp authentication chap
>!
>ip route 172.25.6.0 255.255.255.0 172.25.66.2
>!
>dialer-list 1 protocol ip list 110
>access-list 110 permit ip any any
>
>hostname newyork
>!
>!
>username chicago password 0 cisco
>!
>isdn switch-type basic-5ess
>interface BRI0
> ip address 172.25.66.2 255.255.255.252
> encapsulation ppp
> dialer map ip 172.25.66.1 name chicago broadcast 13122010012
> dialer map ip 172.25.66.1 name chicago broadcast 13122010013
> dialer-group 1
> ppp authentication chap
>
>ip route 172.25.50.0 255.255.255.0 172.25.66.1
>access-list 110 permit ip any any
>!
>dialer-list 1 protocol ip list 110
>
>The connection doesn't come up.
>I have Debug isdn q931,921,events>!
I have Debug isdn q931,921,events,pack and ppp auth running...
>ISDN BR0: TX -> INFOc sapi = 0 tei = 72 ns = 38 nr = 38 i =
>0x0801270504028
>8901801832C0B3133313232303130303133
> SETUP pd = 8 callref = 0x27
> Bearer Capability i = 0x8890
> Channel ID i = 0x83
> Keypad Facility i = '13122010013'
>ISDN BR0: RX <- RRr sapi = 0 tei = 72 nr = 39
>ISDN BR0: RX <- INFOc sapi = 0 tei = 72 ns = 38 nr = 39 i =
>0x0801A75A08028
>295
> RELEASE_COMP pd = 8 callref = 0xA7
> Cause i = 0x8295 - Call rejected
>ISDN BR0: TX -> RRr sapi = 0 tei = 72 nr = 39
>ISDN BR0: received HOST_DISCONNECT_ACK
>ISDN BR0: Error: Unexpected Disconnect_Ack - callid 8027
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:56 GMT-3