From: Kenneth Sacca (ksacca@xxxxxxxxx)
Date: Wed Jul 19 2000 - 20:51:48 GMT-3
I'm seeing the following output during a "show ip int brief"
Virtual-Access2 131.180.50.5 YES NVRAM up up
Virtual-Template2 131.180.80.10 YES NVRAM down down
Virtual-Access3 131.180.60.5 YES NVRAM up up
Virtual-Template3 131.180.60.5 YES NVRAM down down
Virtual-Access4 131.180.50.5 YES TFTP up up
Notice how Virtual-Access 2 and Virtual-Access 4 have the same IP
address, their states are both up up, but the source for the top
one is NVRAM and the source for the bottom one is TFTP.
How can I get rid of the bottom one? When I do a shutdown on the
serial interface, the subinterface goes down and virtual-access 2
goes down, but virtual-access 4 is still up and pings can still go
through. You can't do a shutdown on a virtual-access interface so
how do I get rid of it?
Thanks Ken
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:55 GMT-3