From: John Conzone (jkconzone@xxxxxxxx)
Date: Tue Jul 18 2000 - 20:29:42 GMT-3
That would be a practice lab, right? (wink, nod, and other assorted high
signs)
----- Original Message -----
From: "Andy Singh" <ansingh@cisco.com>
To: "Brian Hescock" <bhescock@cisco.com>
Cc: <ccielab@groupstudy.com>
Sent: Tuesday, July 18, 2000 2:05 PM
Subject: One more question
> thanks to every1's response. i'll try out all these things once i have the
> ISDN stuff configured. I know i messed up on this in the LAB which i took
> last SAT.
> another thing i'd like to find out is how to configure 3920 token ring
> switch so that two deivces that are connected to this switch can talk to
> each other.
> R1(to0)-----Cat3920-----R2(to0)..interfaces are up /up but R1 can't ping
R2
> on same subnet.
>
> andy
> ----- Original Message -----
> From: "Brian Hescock" <bhescock@cisco.com>
> To: "Andy Singh" <ansingh@cisco.com>
> Cc: <ccielab@groupstudy.com>
> Sent: Tuesday, July 18, 2000 10:27 AM
> Subject: Re: How to configure OSPF over ISDN/DDR
>
>
> > Andy,
> > ip ospf demand circuit is correct. You only need to configure it on
> > one side. The most common reason I've seen for it not to work is when
> > people are doing redistribution into ospf and they don't realize that
when
> > the link drops it's going to advertise that fact, which is then
> > redistributed into opsf and the link is brought back up... ;-) If
that's
> > the situation, try passive-interface and/or a distribute-list. Another
> > important thing to remember is the neighbors need to come up one time in
> > "full" state for ip ospf demand circuit to work after that.
> >
> > Brian
> >
> > On Tue, 18 Jul 2000, Andy Singh wrote:
> >
> > > Hello
> > >
> > > Can any1 tell me how to configure OSPF over ISDN line so hello packets
> won't bring up the circuit. i think you can do "ip ospf demand circuit"
> inteface command but i can't get it to work like that.
> > >
> > > i'd appreciate any help
> > > Andy
> > >
> >
> >
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:54 GMT-3