From: Earl Aboytes (earl@xxxxxxxxxxxx)
Date: Tue Jul 18 2000 - 20:16:33 GMT-3
Hard set the duplex on the switch
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Earl Aboytes
Senior Technical Conultant
GTE Managed Solutions
805-381-8817
earl.aboytes@telops.gte.com
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of Andy
Singh
Sent: Tuesday, July 18, 2000 11:06 AM
To: Brian Hescock
Cc: ccielab@groupstudy.com
Subject: One more question
thanks to every1's response. i'll try out all these things once i have the
ISDN stuff configured. I know i messed up on this in the LAB which i took
last SAT.
another thing i'd like to find out is how to configure 3920 token ring
switch so that two deivces that are connected to this switch can talk to
each other.
R1(to0)-----Cat3920-----R2(to0)..interfaces are up /up but R1 can't ping R2
on same subnet.
andy
----- Original Message -----
From: "Brian Hescock" <bhescock@cisco.com>
To: "Andy Singh" <ansingh@cisco.com>
Cc: <ccielab@groupstudy.com>
Sent: Tuesday, July 18, 2000 10:27 AM
Subject: Re: How to configure OSPF over ISDN/DDR
> Andy,
> ip ospf demand circuit is correct. You only need to configure it on
> one side. The most common reason I've seen for it not to work is when
> people are doing redistribution into ospf and they don't realize that when
> the link drops it's going to advertise that fact, which is then
> redistributed into opsf and the link is brought back up... ;-) If that's
> the situation, try passive-interface and/or a distribute-list. Another
> important thing to remember is the neighbors need to come up one time in
> "full" state for ip ospf demand circuit to work after that.
>
> Brian
>
> On Tue, 18 Jul 2000, Andy Singh wrote:
>
> > Hello
> >
> > Can any1 tell me how to configure OSPF over ISDN line so hello packets
won't bring up the circuit. i think you can do "ip ospf demand circuit"
inteface command but i can't get it to work like that.
> >
> > i'd appreciate any help
> > Andy
> >
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:54 GMT-3