snapshot

From: zheng jiang gu (zjgu@xxxxxxxxxx)
Date: Mon Jul 17 2000 - 03:33:21 GMT-3

• Next message: zheng jiang gu: "lsap and access-list 200"
• Previous message: Kevin Young: "Re: Lab3, BGP and route-reflectors"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
   When I see the isdn config below from cco:
   I guess that if I config the rip ,Do I need config the access-list 101
   deny rip any any
   per ip any any.
   
   thanks
   zjgu
   interface BRI0
   ip address 172.16.13.134 255.255.255.0
   encapsulation ppp
   no keepalive
   dialer idle-timeout 300
   dialer map ip 172.16.13.133 name router1 broadcast 5552070
   dialer hold-queue 10 <-- snapshot itself will not
   use this
   dialer-group 1
   snapshot server 5
   ! make sure active time "5" matches the active time on client side
   ppp authentication chap
   !
   !
   router igrp 33
   network 172.16.0.0
   !
   access-list 101 deny igrp any any
   access-list 101 permit ip any any
   !
   dialer-list 1 list 101

• Next message: zheng jiang gu: "lsap and access-list 200"
• Previous message: Kevin Young: "Re: Lab3, BGP and route-reflectors"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:54 GMT-3