From: Vijay Venkatesh (vijay.venkatesh@xxxxxxx)
Date: Sun Jul 16 2000 - 15:20:34 GMT-3
Never mind. Rebooting the router fixed it. This flaky IOS is getting
tiresome.
Vijay.
Vijay Venkatesh wrote:
>
> Here is the situation -
>
> I have two routers with p-p bris and ipx running on them. THe routers
> are connected to a bunch of networks. When the ser 0 on one of the
> routers goes down and I start the ipx ping the bri comes up and DDR
> functions. But, when I bring up the ser 0 the bri does not quit from
> coming up on the ipx ping. COnsequently, the ipx traffic traffic still
> brings up the bri even though the ser 0 is up. I am running ipx rip on
> the bris. From debugs what is causing this to happen is as follow -
>
> o The router still thinks a better route is achieved via the bri
> although I have clearly defined a folating static.
> o The metric is higher on the floating sttatic but the router does not
> see that.
>
> This is what I have done to try to resolve this issue -
>
> o Increase the metrics on the floating static - no use
> o Defined an dialer list with no ipx sap, no ipx rip and no ipx 457
> serializations and permit ipx any any
> o Increase the hop count
>
> None of the above three approaches or combinations have worked. If
> you have any suggestions please let me know. Thank you.
>
> Regards,
> Vijay.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:54 GMT-3