From: John Conzone (jkconzone@xxxxxxxx)
Date: Sat Jul 15 2000 - 13:42:26 GMT-3
John, I don't see a "lane server-bus ethernet ELAN#" command under your
ATM sub interfaces. I think this is required, but I'm no LANE expert.
----- Original Message -----
From: "John McCulley" <jhmac2@hotmail.com>
To: <ccielab@groupstudy.com>
Sent: Saturday, July 15, 2000 10:51 AM
Subject: LECS and LES Cfg on Cat5
> I am trying to configure ATM LECS and LES on a Catalyst 5000 Lane
> Module. I have tried using both static NSAP addresses and the
> auto config param. It doesn't work. Once I move the LES to one
> of the router AIPs it works fine. Any suggestions??
>
> Config below:
> Cat 5 ATM Lane Module
>
> lane database CCIE
> name ELAN1 server-atm-address
47.00918100000000D0C08C9401.00D0C08C9021.01
> name ELAN2 server-atm-address
47.00918100000000D0C08C9401.00D0C08C9021.02
> !
> interface ATM0
> atm preferred phy A
> atm pvc 1 0 5 qsaal
> atm pvc 2 0 16 ilmi
> lane config config-atm-address 47.00918100000000D0C08C9401.00D0C08C9023.00
> lane config database CCIE
> !
> interface ATM0.1 multipoint
> lane config-atm-address 47.00918100000000D0C08C9401.00D0C08C9023.00
> lane server-atm-address 47.00918100000000D0C08C9401.00D0C08C9021.01
> lane client-atm-address 47.00918100000000D0C08C9401.00D0C08C9020.01
> lane client ethernet 1 ELAN1
> !
> interface ATM0.2 multipoint
> lane config-atm-address 47.00918100000000D0C08C9401.00D0C08C9023.00
> lane server-atm-address 47.00918100000000D0C08C9401.00D0C08C9021.02
> lane client-atm-address 47.00918100000000D0C08C9401.00D0C08C9020.02
> lane client ethernet 2 ELAN2
>
> Router 1
>
> interface ATM2/0/0
> no ip address
> no ip directed-broadcast
> no ip route-cache distributed
> atm pvc 1 0 5 qsaal
> atm pvc 2 0 16 ilmi
> no atm ilmi-keepalive
> !
> interface ATM2/0/0.1 multipoint
> ip address 150.10.10.3 255.255.255.0
> no ip directed-broadcast
> lane config-atm-address 47.00918100000000D0C08C9401.00D0C08C9023.00
> lane client ethernet ELAN1
>
> Router 2
>
> interface ATM1/0/0
> no ip address
> no ip directed-broadcast
> no ip route-cache distributed
> atm pvc 1 0 5 qsaal
> atm pvc 2 0 16 ilmi
> no atm ilmi-keepalive
> !
> interface ATM1/0/0.1 multipoint
> ip address 150.10.10.2 255.255.255.0
> no ip directed-broadcast
> lane config-atm-address 47.00918100000000D0C08C9401.00D0C08C9023.00
> lane client ethernet ELAN1
> !
> interface ATM1/0/0.2 multipoint
> ip address 170.10.10.2 255.255.255.0
> no ip directed-broadcast
> lane config-atm-address 47.00918100000000D0C08C9401.00D0C08C9023.00
> lane client ethernet ELAN2
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:53 GMT-3