Re: LECS and LES Cfg on Cat5

From: Dino (air@xxxxxxxxxx)
Date: Sat Jul 15 2000 - 19:32:49 GMT-3

• Next message: Jeff Omick: "Re: PPP callback"
• Previous message: Brad Ellis: "Re: Failure in my first attempt at Sydney on 10th of July"
• Maybe in reply to: John McCulley: "LECS and LES Cfg on Cat5"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Hi John,

You need to add the the following commands on the Cat5 subinterfaces
lane bus-atm-address 47.00918100000000D0C08C9401.00D0C08C9022.0x
lane server-bus ethernet ELANx

On router 1 and 2 subinterfaces:
lane client-atm-address xx.xxxxxxxxxxxxxxxxxxxxxxxx.xxxxxxxxxxxx.0x

The above should fix it.

Thanks,

Dino

John McCulley wrote:
>
> I am trying to configure ATM LECS and LES on a Catalyst 5000 Lane
> Module. I have tried using both static NSAP addresses and the
> auto config param. It doesn't work. Once I move the LES to one
> of the router AIPs it works fine. Any suggestions??
>
> Config below:
> Cat 5 ATM Lane Module
>
> lane database CCIE
> name ELAN1 server-atm-address 47.00918100000000D0C08C9401.00D0C08C9021.01
> name ELAN2 server-atm-address 47.00918100000000D0C08C9401.00D0C08C9021.02
> !
> interface ATM0
> atm preferred phy A
> atm pvc 1 0 5 qsaal
> atm pvc 2 0 16 ilmi
> lane config config-atm-address 47.00918100000000D0C08C9401.00D0C08C9023.00
> lane config database CCIE
> !
> interface ATM0.1 multipoint
> lane config-atm-address 47.00918100000000D0C08C9401.00D0C08C9023.00
> lane server-atm-address 47.00918100000000D0C08C9401.00D0C08C9021.01
> lane client-atm-address 47.00918100000000D0C08C9401.00D0C08C9020.01
> lane client ethernet 1 ELAN1
> !
> interface ATM0.2 multipoint
> lane config-atm-address 47.00918100000000D0C08C9401.00D0C08C9023.00
> lane server-atm-address 47.00918100000000D0C08C9401.00D0C08C9021.02
> lane client-atm-address 47.00918100000000D0C08C9401.00D0C08C9020.02
> lane client ethernet 2 ELAN2
>
> Router 1
>
> interface ATM2/0/0
> no ip address
> no ip directed-broadcast
> no ip route-cache distributed
> atm pvc 1 0 5 qsaal
> atm pvc 2 0 16 ilmi
> no atm ilmi-keepalive
> !
> interface ATM2/0/0.1 multipoint
> ip address 150.10.10.3 255.255.255.0
> no ip directed-broadcast
> lane config-atm-address 47.00918100000000D0C08C9401.00D0C08C9023.00
> lane client ethernet ELAN1
>
> Router 2
>
> interface ATM1/0/0
> no ip address
> no ip directed-broadcast
> no ip route-cache distributed
> atm pvc 1 0 5 qsaal
> atm pvc 2 0 16 ilmi
> no atm ilmi-keepalive
> !
> interface ATM1/0/0.1 multipoint
> ip address 150.10.10.2 255.255.255.0
> no ip directed-broadcast
> lane config-atm-address 47.00918100000000D0C08C9401.00D0C08C9023.00
> lane client ethernet ELAN1
> !
> interface ATM1/0/0.2 multipoint
> ip address 170.10.10.2 255.255.255.0
> no ip directed-broadcast
> lane config-atm-address 47.00918100000000D0C08C9401.00D0C08C9023.00
> lane client ethernet ELAN2
>

• Next message: Jeff Omick: "Re: PPP callback"
• Previous message: Brad Ellis: "Re: Failure in my first attempt at Sydney on 10th of July"
• Maybe in reply to: John McCulley: "LECS and LES Cfg on Cat5"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:54 GMT-3