From: Vijaykrishna (vijaykrishna@xxxxxxxxxxx)
Date: Sat Jul 08 2000 - 14:02:51 GMT-3
I could redist default static into NLSP and it also propogated to other NLSP
router.
NLSP redistributes static routes by default, that's why you'd not see the
redis stat command under nlsp.
!
ipx route default 204.0002.0002.0002 3 1
!
ipx router eigrp 1
network 4415
log-neighbor-changes
!
!
ipx router nlsp
area-address 600 FFFFFF00
area-address 4000 FFFFF000
route-aggregation
redistribute eigrp 1 access-list 1201
!
Other router---
#sh ipx ro
Codes: C - Connected primary network, c - Connected secondary network
S - Static, F - Floating static, L - Local (internal), W - IPXWAN
R - RIP, E - EIGRP, N - NLSP, X - External, A - Aggregate
s - seconds, u - uses, U - Per-user static
11 Total IPX routes. Up to 1 parallel paths and 16 hops allowed.
Current default route is:
NX FFFFFFFE [9][04/02][03/01] via 4006.0010.ff26.4c70, 47s, AT5/0.1
NA 600 FFFFFF00 via 0.0000.0000.0000, Nu0
NA 4000 FFFFF000 [9][02/06] via 4006.0010.ff26.4c70, 47s, AT5/0.1
L 600 is the internal network
C 607 (ISL vLAN), Fa6/0.2
C 608 (ISL vLAN), Fa6/0.1
C 4006 (NOVELL-ETHER), AT5/0.1
N 204 [9][01/01] via 4006.0010.ff26.4c70, 47s, AT5/0.1
R 680 [02/01] via 608.0000.0c40.f440, 46s, Fa6/0.1
-----Original Message-----
From: Matt Holbert <mholbert@icscorp.com>
To: ccielab@groupstudy.com <ccielab@groupstudy.com>
Date: Saturday, July 08, 2000 12:41 AM
Subject: IPX route default redistribution into NLSP
>
>Anyone know how to get an IPX default route to redistribute into NLSP? It
>seems that NLSP will only redistribute static routes, NOT default static
>routes. The only solution I've been able to come up with is to generate a
>static route with a mask of zero, then redistribute that.
>
>Matt Holbert
>Network Engineer
>Integrated Communication Solutions, Inc.
>301-695-8800
>mholbert@icscorp.com
>http://www.icscorp.com
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:53 GMT-3