From: Kevin Baumgartner (kbaumgar@xxxxxxxxx)
Date: Tue Jun 27 2000 - 20:33:13 GMT-3
Are you trying to ping the local router or the remote router?
If you are talking about the remote router which is really what you need
to test how can this work no ip address assigned?
Kevin
At 06:17 PM 6/27/00 -0500, you wrote:
>Kevin,
>At this point I don't warry about interesting traffic, I just want to have
>int bri0 in up/up state. you should be able to do this even with no ip
>adresses assigned and no dialer-groups defined.
>
>-----Original Message-----
>From: Kevin Baumgartner [mailto:kbaumgar@cisco.com]
>Sent: Tuesday, June 27, 2000 6:12 PM
>To: Zaitsev DN (Dmitry)
>Cc: ccielab@groupstudy.com
>Subject: Re: Teltone config problem
>
>
>You need also "dialer-group 1" on R6. Otherwise interesting traffic
>will not to be forwarded in or out of BRI interface.
>
> This a common thing that a lot of people make the mistake on when
>doing ISDN. You need a dialer-group on the caller - R1 and also the
>receiver - R6.
>
> Kevin
>
>
>At 05:38 PM 6/27/00 -0500, you wrote:
> >I am using a Teltone Demonstrator to simulate BRI.
> >
> >R1-----Teltone-----R6
> >
> >R1#
> >interface BRI0
> > ip address 122.11.1.1 255.255.255.0
> > encapsulation ppp
> > dialer map ip 122.11.1.2 name R6 18008358662
> > dialer load-threshold 1 either
> > dialer-group 1
> > isdn spid1 0835866101
> > isdn spid2 0835866301
> > no cdp enable
> > ppp multilink
> >
> >dialer-list 1 protocol ip permit
> >
> >R6#
> >interface BRI0
> > ip address 122.11.1.2 255.255.255.0
> > encapsulation ppp
> > dialer map ip 122.11.1.1 name R1
> > dialer load-threshold 1 either
> > isdn switch-type basic-ni
> > isdn spid1 0835866201
> > isdn spid2 0835866401
> > ppp multilink
> >
> >By pinging 122.11.1.2 from R1, I can get BRI0:1 and BRI0:2 to connect but
> >interface bri0 still in spoofing state and of course no ping replies.
> >Teltone is in basic-Ni1 mode.
> >How do I put interface bri0 in up/up mode?
> >Thanks
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:43 GMT-3