From: William Darkwah (william.darkwah@xxxxxxx)
Date: Thu Jun 15 2000 - 10:01:56 GMT-3
Thanks all, I found what my problem was. If you run three different routing
proccesses on the same router the redistribution need to be fully meshed.
For example if you have ospf,igrp,eigrp and rip running on different
interfaceses on the same router you have to do a mutual redistribution
between all the protocols to get all your routes. Each routing protocol will
have 3 different redistribution statements under it.
A single protocol can redistribute externals into the other if you are using
different routers.
William
----- Original Message -----
From: Goh, Winston <winston.goh@sg.unisys.com>
To: 'William Darkwah' <william.darkwah@gte.com>; <ccielab@groupstudy.com>
Sent: Thursday, June 15, 2000 1:05 AM
Subject: RE: Redistribute ospf externals into either igrp/eigrp
> Hi William,
> redistributing ospf into igp (not bgp), internal or external route (E1 or
> E2) can be redistributed. Unless the target domain is classful like igrp
> etc. i think u have already tried summarizing and it is the correct
> approach. cheers
>
>
> Winston Goh
> CCNP, CVE
> Snr Network Specialist
> Unisys Singapore
> mobile : 97469192
>
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:42 GMT-3