From: Rob Barton (rob.barton@xxxxxxxxx)
Date: Mon Jun 12 2000 - 19:01:30 GMT-3
Another question along the same line. When using the "ip ospf
demand-circuit" do you still need to specify the interesting traffic to
deny ospf?
e.g.
dialer-list 1 protocol ip list 109
access-list 109 deny ospf any any
access-list 109 permit ip any any
- Rob.
kmiho@lycos.ne.jp wrote:
> Is it true that when you use the "ip ospf demand-circuit" command,
> the link will be brought up once even though the network topology is
> stable(or else the other side of the bri0 will not make it to OSPF
> database?). I do not have the isdn simulator to verify that but I do
> notice the following message appear even though the ethernet link
> between R1 and R2 is not broken.
>
> ********
> bri0: ip (s=R1's bri0, d=224.0.0.5), interesting(ip PERMIT)
> bri0: sending broadcast to ip (R2's bri0)
> ********
>
> Can somebody clarify this? Thanks in advance.
>
> --- R1(bri0)------------- isdn ------------(bri0)R2----
> (e0) (e0)
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:41 GMT-3