From: Lekan Magbagbeola (lekkyl@xxxxxxxxxxx)
Date: Wed Jun 07 2000 - 10:06:37 GMT-3
Keith,
Well, I disagree with you on the issue of EIGRP. I have configured DDR with
EIGRP and it worked! All you have to do is configure your dialer-list not to
see the following as interesting;
1. traffic going from the BRI interface to host 224.0.0.10
2. EIGRP traffic going from one BRI interfaces to the other
Any other traffic as interesting!
Try it, this should work.
Lekan
>From: "Kruepke" <lister@kruepke.com>
>Reply-To: "Kruepke" <lister@kruepke.com>
>To: <abdul_rahim@ccsi.canon.com>, <ccielab@groupstudy.com>
>Subject: Re: DDR config with EIGRP and OSPF
>Date: Tue, 6 Jun 2000 20:33:43 -0500
>
>Abdul,
>
>EIGRP cannot do DDR. The necessity of the Hellos prevents it.
>
>OSPF uses a feature called Demand Circuit to do DDR. I don't have any
>configs handy, but all you need to do is enter the 'ip ospf demand-circuit'
>in interface configuration mode. It only needs to be done to one side of
>the link. With this, your LSAs from across the link should be marked DNA
>(do not age) in the link state database, and your demand circuit neighbor
>should not have a hold timer.
>
>Regards,
>Keith
>
>----- Original Message -----
>From: <abdul_rahim@ccsi.canon.com>
>To: <ccielab@groupstudy.com>
>Sent: Tuesday, June 06, 2000 3:52 PM
>Subject: DDR config with EIGRP and OSPF
>
>
>Hi Can any body forward me some DDR configs with EIGRP
>Thanks
>Abdul
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:41 GMT-3