From: Richard Mott (richpmott@xxxxxxxxxxx)
Date: Tue Jun 06 2000 - 20:48:23 GMT-3
line X
script dialer <script>
Rich Mott
CCIE #5234
Network Engineer
Jannon Solutions
>From: "Jason T. Rohm" <jtrohm@athenet.net>
>Reply-To: "Jason T. Rohm" <jtrohm@athenet.net>
>To: "ccielab@groupstudy.com" <ccielab@groupstudy.com>
>Subject: Dialer Pools with Async Interfaces (Correction)
>Date: Tue, 6 Jun 2000 16:47:11 -0500
>
>Correction, the second command should read:
>
>(config-if)#dialer string <string> modem-script <script>
>
>-Jason
>
>
>-----Original Message-----
>From: Jason T. Rohm [SMTP:jtrohm@athenet.net]
>Sent: Tuesday, June 06, 2000 3:37 PM
>To: ccielab@groupstudy.com
>Subject: Dialer Pools with Async Interfaces
>
>
>I am having problems with configuring dialer pools on async interfaces. I
>am unable to find where I configure the modem script for the interface...
> I have seen reference to the following commands on CCO:
>
>(config-line)#modem chat-script <script>
>and
>(config-if)#modem string <string> modem-script <script>
>
>Neither of them seems to exist on my routers. I am running IOS v11.2(22).
>
>debug dialer:
>
>.Jun 6 15:24:20.668: Async1: rotor dialout [priority]
>.Jun 6 15:24:20.672: Async1: Dialing cause ip (s=10.1.40.21, d=224.0.0.10)
>.Jun 6 15:24:20.672: Async1: Attempting to dial 7576962
>.Jun 6 15:24:20.676: CHAT1: Attempting async line dialer script
>.Jun 6 15:24:20.676: CHAT1: no matching chat script found for 7576962
>.Jun 6 15:24:20.676: Async1: Unable to dial 7576962.
>
>Ideas?
>
>-Jason
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:41 GMT-3