From: Jason T. Rohm (jtrohm@xxxxxxxxxxx)
Date: Tue Jun 06 2000 - 18:47:11 GMT-3
Correction, the second command should read:
(config-if)#dialer string <string> modem-script <script>
-Jason
-----Original Message-----
From: Jason T. Rohm [SMTP:jtrohm@athenet.net]
Sent: Tuesday, June 06, 2000 3:37 PM
To: ccielab@groupstudy.com
Subject: Dialer Pools with Async Interfaces
I am having problems with configuring dialer pools on async interfaces. I
am unable to find where I configure the modem script for the interface...
I have seen reference to the following commands on CCO:
(config-line)#modem chat-script <script>
and
(config-if)#modem string <string> modem-script <script>
Neither of them seems to exist on my routers. I am running IOS v11.2(22).
debug dialer:
.Jun 6 15:24:20.668: Async1: rotor dialout [priority]
.Jun 6 15:24:20.672: Async1: Dialing cause ip (s=10.1.40.21, d=224.0.0.10)
.Jun 6 15:24:20.672: Async1: Attempting to dial 7576962
.Jun 6 15:24:20.676: CHAT1: Attempting async line dialer script
.Jun 6 15:24:20.676: CHAT1: no matching chat script found for 7576962
.Jun 6 15:24:20.676: Async1: Unable to dial 7576962.
Ideas?
-Jason
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:41 GMT-3