multicast routing

From: Kevin Young (kvyoung@xxxxxxxx)
Date: Tue May 30 2000 - 08:50:45 GMT-3

• Next message: Greenjeepp@xxxxxxx: "lane"
• Previous message: Rob Barton: "igrp question"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
is thers a way to add a flag "L" to multicast routing?

r6#sh ip mr
IP Multicast Routing Table
Flags: D - Dense, S - Sparse, C - Connected, L - Local, P - Pruned
       R - RP-bit set, F - Register flag, T - SPT-bit set, J - Join SPT
Timers: Uptime/Expires
Interface state: Interface, Next-Hop, State/Mode

(*, 224.0.1.39), 00:11:06/00:02:58, RP 0.0.0.0, flags: DJP
  Incoming interface: Null, RPF nbr 0.0.0.0
  Outgoing interface list: Null

(*, 224.0.1.40), 01:34:45/00:02:59, RP 0.0.0.0, flags: DJP
  Incoming interface: Null, RPF nbr 0.0.0.0
  Outgoing interface list: Null

(153.3.200.30/32, 224.0.1.40), 00:00:09/00:02:50, flags: PT
  Incoming interface: Serial0, RPF nbr 0.0.0.0
  Outgoing interface list: Null

all interfaces are sparse mode.
question is how to add flags "D" and "L" to the (153.3.200.30/32, 224.0.1.40) ?

thanks for a light.

• Next message: Greenjeepp@xxxxxxx: "lane"
• Previous message: Rob Barton: "igrp question"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:40 GMT-3