Re: ws-x5213A and ISL

From: John Wu (jwu1773@xxxxxxxxx)
Date: Sat May 27 2000 - 22:34:47 GMT-3

   
fyi...ISL does work - as Brad would put it. However, 802.1Q doesn't work on
the WS-X5213A.

=====================

Console> sho trunk detail
Port Mode Encapsulation Status Native vlan
-------- ----------- ------------- ------------ -----------
 2/1 on isl trunking 1

Console> (enable) sho module
Mod Module-Name Ports Module-Type Model Serial-Num
Status
--- ------------------- ----- --------------------- --------- --------- ---- 

---
1   Supervisor I        2     100BaseTX Supervisor  WS-X5009  012345678 ok
2   WS-X5213A           12    10/100BaseTX Ethernet WS-X5213  012345678 ok

Mod MAC-Address(es)                        Hw     Fw         Sw
--- -------------------------------------- ------ ---------- ---------------
--
1   00-60-70-7f-b0-00 to 00-60-70-7f-b3-ff 1.8    1.5        4.5(3)
2   00-60-2f-18-e0-88 to 00-60-2f-18-e0-93 1.0    1.4        4.5(3)
Console (enable) set trunk 2/1 on dot1q
Failed to set port 2/1 to trunk mode on.
Failed to set port 2/1 trunk type to dot1q.
Feature not supported on Module 2.

<snip>

-- john
----- Original Message -----
From: "Brad Ellis" <ironbrad@WANgurus.com>
To: "Eddie M. Parra" <eparra@fanlink.com>; "'Nnanna Obuba'"
<obuba@yahoo.com>; "'groupstudy'" <ccielab@groupstudy.com>
Sent: Wednesday, May 24, 2000 1:03 AM
Subject: Re: ws-x5213A and ISL

> Eddie/Nnanna,
>
> Hi!  It won't support it?  Umm...I have a WS-X5213A and a 2620...it sure
> looked like it supported it to me!  I've messed around with ISL trunking
> between my Cat5k and my 2620, and I'd have to say it definitely supports
it.
> I can set it up on-line and you can telnet into it and see for yourself.
>
> -Brad Ellis
> CCIE#5796
> (Eddie, how's that ATM card working out for ya?)
> ----- Original Message -----
> From: "Eddie M. Parra" <eparra@fanlink.com>
> To: "'Nnanna Obuba'" <obuba@yahoo.com>; "'groupstudy'"
> <ccielab@groupstudy.com>
> Sent: Wednesday, May 24, 2000 1:05 AM
> Subject: RE: ws-x5213A and ISL
>
>
> > If you are talking about the 12 port 10/100 blade... Yes...
> > It won't support 802.1q...
> >
> > -Eddie
> >
> > -----Original Message-----
> > From: Nnanna Obuba [mailto:obuba@yahoo.com]
> > Sent: Wednesday, May 24, 2000 12:40 AM
> > To: groupstudy
> > Subject: ws-x5213A and ISL
> >
> >
> >
> >
> > Hi all,
> >
> > Does anyone know if the 5213A module on the cat 5000 supports ISL?
> >
> > TIA
> >
> > Nnanna
> >

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:32 GMT-3