From: zheng jiang gu (zjgu@xxxxxxxxxx)
Date: Sat May 27 2000 - 22:01:52 GMT-3
hi everyone:
when I config the pri and digital modem on 3640,I found a problem:
the hayes modem can success.anyother modem will fail because line is
busy.
Do you meet the same problem?
the ios ver is 12.0 and the modem ver is 2.6.2
the config is below:
isdn switch-type primary-net5
isdn voice-call-failure 0
!
!
controller E1 0/0
framing NO-CRC4
pri-group timeslots 1-31
!
!
!
!
!
interface Serial0/0:15
no ip address
encapsulation ppp
ip mroute-cache
dialer rotary-group 1
isdn switch-type primary-net5
isdn incoming-voice modem 64
no cdp enable
!
interface FastEthernet2/0
ip address 172.16.1.20 255.255.0.0
duplex auto
speed auto
!
interface Group-Async1
ip unnumbered FastEthernet2/0
ip helper-address 172.16.1.5
encapsulation ppp
async mode dedicated
peer default ip address pool pripool
no fair-queue
no cdp enable
ppp authentication chap pap ms-chap callin
group-range 33 62
!
interface Dialer1
ip unnumbered FastEthernet2/0
ip helper-address 172.16.1.5
encapsulation ppp
dialer in-band
dialer idle-timeout 180
dialer-group 1
peer default ip address pool pripool
no cdp enable
ppp authentication chap pap ms-chap callin
!
router rip
network 172.16.0.0
!
ip local pool pripool 172.16.31.10 172.16.31.254
ip classless
no ip http server
!
!
line 33 62
autoselect ppp
modem Dialin
line aux 0
line vty 0 4
exec-timeout 0 0
!
end
best regards
zjgu@ce-air.com
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:32 GMT-3