From: Brad Ellis (ironbrad@xxxxxxxxxxxx)
Date: Wed May 24 2000 - 21:15:02 GMT-3
Robert,
Hi! What model of router # is it? I've had some problems in the lab and in
the field with 12.0(9) code. Try using 12.0(7)T and see if it does the same
thing.
-Brad
----- Original Message -----
From: <Robert_Wang@toyota.com>
To: <ccielab@groupstudy.com>
Sent: Wednesday, May 24, 2000 6:50 PM
Subject: IP RSVP on BRI interface
>
>
> Has any one configured "bandwidth 56" and "ip rsvp bandwidth 42 42"
commands on
> the Bri interface? It caused my ISDN links to go up and down until I
removed
> it. IOS 12.0(9) code. (no header compression was used here!)
>
> I did this to match the same commands configured on all the serial
interfaces on
> all routers along the path between two phones. Such as Phone A ---
R1 --
> serial -- R2 ---- ISDN ---- R3 --- serial ---- R4 ---- Phone B !!
>
> Thanks.
>
> -Robert-
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:31 GMT-3