From: Robert_Wang@xxxxxxxxxx
Date: Wed May 24 2000 - 19:45:45 GMT-3
To the VOIP experts,
I am trying to figure out how to apply the following configs. to real world
voice dial plans scenario.
Both R1 and R2 are 2600 routers with a dual-port FXS module. One phone plugs
into each router.
R1>>>
voice-port 1/0/0
!
dial-peer voice 10 pots
destination +31022466..
port 1/0/0
!
dial-peer voice 20 voip
destination 415.......
session target ipv4:10.1.1.2
!
num-exp 1. 310224661.
R2>>>
voice-port 1/0/0
!
dial-peer voice 10 pots
destination +41511.....
port 1/0/0
!
dial-peer voice 20 voip
destination 310.......
session target ipv4:10.1.1.1
!
num-exp 5.... 415115....
My questions are ---
1. Say there are multiple phones attach to both routers through a T1 MUX, phone
s
attach to R1 are 31022466xx and
phones attach to R2 are 41511xxxxx, is this a correct application for the above
configs?
2. From the phone on R1, dial 41511xxxxx (x represents any digit), R2 phone wil
l
ring, so where the "num-exp 5 ..." comes into play here?
3. From the phone on R2, dial 31022466xx, R1 phone will ring, I thought R1 phon
e
should ring only when R2 dials 310224661x.
4. If I add a "prefix 9," under the POTS dial peer section of both routers, wha
t
will happen?
5. What is the main purpose of the "num-exp" statement on both routers?
-Thanks a bunch-
Robert
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:31 GMT-3