From: AndyChang@xxxxxxxxxxxxxxxx
Date: Tue May 23 2000 - 00:36:39 GMT-3
Hello,
The syntax as I read it seems to imply the below:
dlsw icanreach {mac-exclusive | netbios-exclusive [remote] | mac-address mac-ad
dr
[mask mask] | netbios-name name | saps}
no dlsw icanreach {mac-exclusive | netbios-exclusive [remote] | mac-address mac
-addr
[mask mask] | netbios-name name | saps}
Syntax Description
..
mac-address mac-addr
Configures a MAC address that this router can locally reach
.
mask mask
(Optional) MAC address mask in hexadecimal h.h.h. The "f" v
alue represents the "don't care" bit
and the "0" value represents the "care" bit. The mask indic
ates which bits in the MAC address are
relevant.
Shouldn't
> ** To permit or reach only one MAC address
> 4000.3745.0003, use
>
> 1. dlsw icanreach mac-adddress 4000.3745.0003 mask
> ffff.ffff.ffff
be
> 1. dlsw icanreach mac-adddress 4000.3745.0003 mask
> 0000.0000.0000
and
> 3. dlsw icanreach mac-address 4000.3745.0000 mask
> ffff.ffff.0000
be
> 3. dlsw icanreach mac-address 4000.3745.0000 mask
> 0000.0000.ffff
?
IMHO
Andy.
"Earl Aboytes" <earl@linkline.com>@groupstudy.com on 23-05-2000 09:34:31 AM
Please respond to "Earl Aboytes" <earl@linkline.com>
Sent by: nobody@groupstudy.com
To: "Muthu Mohanasundaram" <mmsundar@yahoo.com>, <Robert_Wang@toyota.com>,
<ccielab@groupstudy.com>
cc:
Subject: RE: Dlsw mac address
Robert,
Although your lists are constructed correctly, if you want to show
reachability to one and only one mac address you must use the dlsw icanreach
mac-exclusive command. This tells peers that it can reach only one mac
address. I am not sure if that was part of your question.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Earl Aboytes
Senior Technical Conultant
GTE Managed Solutions
805-381-8817
earl.aboytes@telops.gte.com
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of Muthu
Mohanasundaram
Sent: Monday, May 22, 2000 4:23 PM
To: Robert_Wang@toyota.com; ccielab@groupstudy.com
Subject: Re: Dlsw mac address
Hi Bob,
I think you are correct.
But let's see if someone can confirm.
Mohan.
--- Robert_Wang@toyota.com wrote:
>
>
> Just like to clarify if the following masks are
> correct ---
>
> ** To permit or reach only one MAC address
> 4000.3745.0003, use
>
> 1. dlsw icanreach mac-adddress 4000.3745.0003 mask
> ffff.ffff.ffff
>
> 2. access-list 700 permit 4000.3745.0003
> 0000.0000.0000
>
> ** To permit or reach the range of 4000.3745.0000
> through 4000.3745.ffff, use
>
> 3. dlsw icanreach mac-address 4000.3745.0000 mask
> ffff.ffff.0000
>
> 4. access-list 701 permit 4000.3745.0000
> 0000.0000.ffff
>
>
> Are the above statements correct?? Please advice.
> Thanks.
>
> Robert
>
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:30 GMT-3