From: Muthu Mohanasundaram (mmsundar@xxxxxxxxx)
Date: Sat May 20 2000 - 11:39:05 GMT-3
Did you try
ipx router rip
no network <network number of BRI>
I think this will stop RIP/SAP updates going on to the
BRI interface and will not trigger your ISDN line.
Tell me if this helped.
Good Luck,
Mohan.
--- stiff <stiff.yu@datacraft-asia.com> wrote:
> yes,you must stop ipx sap and use spx spoof and
> watchdog spoof,
> pls tell me result.
> -----Original Message-----
> From: tok cok <tokcok@hotmail.com>
> To: ccielab@groupstudy.com <ccielab@groupstudy.com>
> Date: 2000Äê5ÔÂ19ÈÕ 18:52
> Subject: ISDN DDR for IPX
>
>
> >Hi Guys,
> >
> >I was doing ISDN DDR for Dynamic Routing for IP. I
> had try OSPF demand
> >circuit, floating static and snapshot. Everything
> works fine.
> >
> >Next I try out on IPX Dynamic. There is something
> that I'm abit not sure
> >whether is that how IPX works.
> >
> >I had configure ISDN backup for two routers' serial
> link connection.
> >The BRI interface for the two router is not running
> IPX RIP. Static route
> >is being specified. Interesting traffic specified
> is permit IPX.
> >I discovered that the even though static route is
> being specified, the ISDN
> >will still brings up when IPX RIP is being
> broadcasted.
> >
> >Am I right that for IPX RIP even for static route
> being specified, dialer
> >list still must be specified to stop RIP/SAP from
> bring up the link
> >unnecessary.
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:30 GMT-3