From: stiff (stiff.yu@xxxxxxxxxxxxxxxxxx)
Date: Sat May 20 2000 - 02:45:52 GMT-3
yes,you must stop ipx sap and use spx spoof and watchdog spoof,
pls tell me result.
-----Original Message-----
From: tok cok <tokcok@hotmail.com>
To: ccielab@groupstudy.com <ccielab@groupstudy.com>
Date: 2000年5月19日 18:52
Subject: ISDN DDR for IPX
>Hi Guys,
>
>I was doing ISDN DDR for Dynamic Routing for IP. I had try OSPF demand
>circuit, floating static and snapshot. Everything works fine.
>
>Next I try out on IPX Dynamic. There is something that I'm abit not sure
>whether is that how IPX works.
>
>I had configure ISDN backup for two routers' serial link connection.
>The BRI interface for the two router is not running IPX RIP. Static route
>is being specified. Interesting traffic specified is permit IPX.
>I discovered that the even though static route is being specified, the ISDN
>will still brings up when IPX RIP is being broadcasted.
>
>Am I right that for IPX RIP even for static route being specified, dialer
>list still must be specified to stop RIP/SAP from bring up the link
>unnecessary.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:30 GMT-3