From: Hugh (hughstudy@xxxxxxxx)
Date: Thu May 18 2000 - 12:48:33 GMT-3
It's said that "lane config fixed-config-atm-address" will use a RFC specified
address. Should I configure LECS address on ATM switch or use "lane config-atm-
address" to specify the ATM address???
----- Original Message -----
From: Scott F. Robohn <sfr@ccci.com>
To: Sakandar, Basir <SAKANBA@mail.northgrum.com>; ccielab groupstudy <ccielab@g
roupstudy.com>
Sent: Thursday, May 18, 2000 10:02 PM
Subject: Re: CCIE-LANE
> Basir,
>
> r1 is fine. r2 doesn't need anything special; you only need
> 'lane config fixed-config-atm-address' on the device running
> the LECS.
>
> I'm trying to replicate some of the options that have been
> discussed here recently and I think I'm having some trouble
> with 12.0.9 and/or 12.0.7T. I'll report back when I find
> something conclusive.
>
> Good luck!
>
> Scott
>
> "Sakandar, Basir" wrote:
> >
> > Thanks Scott. Do I need to do anything special on r2? I figure the config
> > would look like this now.
> >
> > r1
> > =
> > lane database my_database
> > name elan1 server-atm-address 47.009181000000006083c58601.00000c7c3c99.01
> >
> > interface atm0/1
> > no ip ad
> > lane config my_database
> > lane config fixed-config-atm-address
> > atm pvc 1 0 5 qsaal
> > atm pvc 2 0 16 ilmi
> >
> > int atm0.1
> > ip ad 10.1.1.1 255.255.255.0
> > lane server-bus ethernet elan1
> > lane client ethernet elan1
> >
> > r2
> > ==
> > interface atm0/1
> > no ip ad
> > lane config fixed-config-atm-address
> > atm pvc 1 0 5 qsaal
> > atm pvc 2 0 16 ilmi
> >
> > int atm0.1
> > ip ad 10.1.1.2 255.255.255.0
> > lane client ethernet elan1
> >
> > -----Original Message-----
> > From: Scott F. Robohn [mailto:sfr@ccci.com]
> > Sent: Wednesday, May 17, 2000 3:03 PM
> > To: Sakandar, Basir; 'cisco@groupstudy.com'
> > Subject: Re: CCIE-LANE
> >
> > Yes.
> >
> > On the major atm interface on r1, use the 'lane config
> > fixed-config-atm-address' for the LECS. This will force the
> > LECS to advertise the well-known LECS address, which the
> > LANE Clients already know how to use. This requires no
> > special configuration commands on the ls1010.
> >
> > HTH,
> > Scott
> >
> > "Sakandar, Basir" wrote:
> > >
> > > I want to make r1 the LECS, but I don't want to put the LECS address on
> > the
> > > ATM switch, can r2 still join the elan?
> > >
> > > For example,
> > >
> > > r1---atm----r2
> > >
> > > Basir Ahmad Sakandar
> > > Network Design and Engineering
> > > Ph:310-332-3691
> > >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:30 GMT-3