From: Muthu Mohanasundaram (mmsundar@xxxxxxxxx)
Date: Wed May 17 2000 - 16:05:04 GMT-3
Hi All,
The Catalyst 5000 manuals say the ESI part of the ATM
address for LANE components are :
LEC = .......0.**
LES = .......1.**
BUS = .......2.**
LECS= .......3.00
That is LEC has 0, LES has 1, BUS has 2 and LECS has 3
in the last byte of the ESI.
Is this sequence a MUST for LANE to operate? Or are
these values are just given as Cisco defaults so that
they are easy to remember?
My problem is, if I am configuring all these LANE
components with my own explicit atm addresses, do I
have to follow this sequence.
For example if my LECS address is
47.0091810000......00.0061.705b.7702.00,
can I use
47.0091810000......00.0061.705b.1111.** for my LES
47.0091810000......00.0061.705b.2222.** for my BUS
47.0091810000......00.0061.705b.3333.** for my LEC
on the same router ?
Can someone point me to a good URL on this stuff.
Any help would be appreciated.
Thanks,
Mohan.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:29 GMT-3