From: pbosio@xxxxxxxxxxxxxx
Date: Fri May 12 2000 - 01:43:58 GMT-3
if u are asking how to insert a number ( say 9 ) use the prefix command. u can
use "," to insert a pause of about 100ms ( don't quote me on the pause time )
example below:
match on incoming string starting with 20 ( lets say the total incoming string
is 2012345678 ).. the leading 20 will be striped as its matched by the
dest-pattern.
the prefix adds to the START of the string, so outgoing digits to port 1/5 will
be 9,12345678
hope this helps.
dial-peer voice 51 pots
destination-pattern 20
port 1/5
prefix 9,
Cheers
Paul
Does anyone know how you can configure voip to require 9 for an outside line?
Earl
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:29 GMT-3