From: wyan@xxxxxxxxxx
Date: Tue May 09 2000 - 12:03:00 GMT-3
For the EBGP peering, try to put a static route on R7:
ip route 200.200.200.1 255.255.255.0 137.20.10.1
---------------------- Forwarded by Weidong Yan/Markham/IBM on 05/09/2000
10:58 AM ---------------------------
"tok cok" <tokcok@hotmail.com> on 05/09/2000 06:23:57 AM
Please respond to "tok cok" <tokcok@hotmail.com>
To: ccielab@groupstudy.com
cc:
Subject: bootcamp lab 8
Hi all,
The lab 8 is really getting me.........
ok there is my problem.
1. How you do the mutually redistribute between OSPF and IGRP on R5 (point
10 of section 2 task 2)? I try of putting a default route in R4 so that
all the route outside IGRP can be routed out. But if i do that then the
redistribution will be meanningless. I'm really stuck in why to do the
mutual redistribution between VLSM to FLSM.
2. Peering EBGP neighbor. R1 is to peer with R7. R1 is AS 2 and R7 is AS
3. R1 is using loopback 0 as update source. This is what I did.
R1's E0 137.20.10.1
lo0 200.200.200.1
R2's E0 137.20.10.7
R1
router bgp 2
neig 137.20.10.1 remote-as 3
neig 137.20.10.1 update-source lo0
R7
router bgp 3
neig 200.200.200.1 remote-as 2
neig 200.200.200.1 ebgp-multihop 255
What did I miss out. I can't get the two router to establish.
Can anyone help me on this? Or is they anyone finish this lab already, can
send me the configuration for reference?
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:28 GMT-3