From: Michael Needham (mineedha@xxxxxxxxx)
Date: Fri May 05 2000 - 13:42:28 GMT-3
You do not need the SOurce-bridge ring-group for bridging ethernet with
DLSW.. It is an error or habit to put it in but, it will not impact
it's`operation....
John Conzone wrote:
>
> It works fine with SNA as well.
> ----- Original Message -----
> From: "Asbjorn Hojmark" <Asbjorn@Hojmark.ORG>
> To: "'John Conzone'" <jkconzone@home.com>
> Cc: "'Kinton Connelly'" <kinton@oldmedia.com>; "'Nnanna Obuba'"
> <obuba@bellatlantic.net>; <ccielab@groupstudy.com>
> Sent: Thursday, May 04, 2000 5:04 PM
> Subject: RE: quick DLSW+ question
>
> >
> > > I keep seeing the source-bridge ring-group statements on
> > > these DLSW routers with no Token Ring, just Ethernet, and I
> > > can't figure out why they are there.
> >
> > Same thing here. I don't get it.
> >
> > > I configured a bunch of DLSW routers with ethernet, and never
> > > used that statement. Only on Token Ring peers.
> >
> > I tested it in the lab today and it does indeed work fine with-
> > out 'source-bridge ring-group'. At least for NetBIOS, I didn't
> > test SNA.
> >
> > CCO samples (http://www.cisco.com/warp/customer/697/3.html)
> > doesn't use it whereas the DLSw configuration guide for 12.1
> > does.
> >
> > -A
> > --
> > Heroes: Vint Cerf & Bob Kahn, Leonard Kleinrock, Robert Metcalfe
> > Links : http://www.hojmark.org/networking/
> >
> >
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:27 GMT-3