From: Clifton Stewart (cliftonlstewart@xxxxxxxx)
Date: Fri Apr 28 2000 - 04:55:02 GMT-3
Wyan,
On your statement area 2 virtual link (md5 authentication) is needed.
Try enabling authentication on both sides of the virtual link, then
issue debug ip ospf packet. This should resolve your problem.
Clifton Stewart-CCNA, CCIE Candidate
wyan@ca.ibm.com wrote:
>
> Hi, there,
>
> I tried to config the following network but couldn't get the virtual link
> up.
>
> R1--Area0--- R2---Area1---R3---Area3----R4
>
> Area 0 using MD5
> Virtual link between R2/R3
>
> Looks like R2 is checking incoming hello from R3 with MD5(type 2) but
> couldn't make
> R3 to talk in MD5. Have tried enabling MD5 in area1 and/or area3 but R3
> still sent
> type 0 hello to R2 on the virtual link. R2 is version 11.2 and R3 is 12.05.
>
> Any help would be appreciated. Thanks.
>
> Weidong Yan
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:16 GMT-3