From: Stanley Seow (stanley_seow@xxxxxxxxxxxxxxxxxxx)
Date: Thu Apr 27 2000 - 14:44:25 GMT-3
Bill,
dlsw icanreach is exchange during the capabilities exchange session...
so your netbios access list does not work this way...
Netbios access list is only use during circuit establishment only...
Try to connect two PC with NetBeui turn on.. and filter them out...
Stanley
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Bill Dellamar
> Sent: Wednesday, April 26, 2000 7:29 AM
> To: ccielab@groupstudy.com
> Subject: netbios access-list
>
>
> I am trying to filter using a netbios access-list.
> Could somebody explain why bill shows up on R1 when
> doing a show dlsw capabilities.
> Thanks,
>
> R1
> dlsw local-peer peer-id 201.43.16.1
> dlsw remote-peer 0 tcp 172.16.1.242
>
>
> R2
> netbios access-list host abc deny bill
> netbios access-list host abc permit *
> !
> dlsw local-peer peer-id 172.16.1.242
> dlsw remote-peer 0 tcp 201.43.16.1 host-netbios-out
> abc
> !
> dlsw icanreach mac-address 1234.1234.1234 mask
> ffff.ffff.ffff
> !
> dlsw icanreach netbios-name bill
> dlsw icanreach netbios-name steve
> !
>
>
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:16 GMT-3