From: Bob Reed (bobr@xxxxxxxxxxx)
Date: Mon Apr 24 2000 - 18:02:01 GMT-3
Ron,
Try moving the distribute commands up to ospf.
Bob Reed
----- Original Message -----
From: <Ron.Fuller@3x.com>
To: <ccielab@groupstudy.com>
Sent: Monday, April 24, 2000 3:09 PM
Subject: RIP and OSPF
> I have having major troubles getting RIP and OSPF to redistribute
properly.
> I have a router (R5) that is learning 2 RIP routes from another. R5 runs
> OSPF and RIP. I want to filter one of the RIP routes before I
redistribute
> it into OSPF. I have configured the ASBR as such:
>
> router ospf 10
> redistribute rip metric 550
> network 172.16.1.240 0.0.0.7 area 0
> !
> router rip
> version 2
> network 24.0.0.0
> distribute-list 1 out ospf 10
> distribute-list 1 out
> !
> access-list 1 permit 201.43.16.0 0.0.0.255
>
> The 2 RIP routes are 201.43.16.0 /24 and 201.43.17.0 /24. I want to
filter
> out the 201.43.17.0 network so OSPF does not see it.
>
> Am I missing the boat here somewhere?
>
> Ron Fuller, CCDP, CCNP-ATM, CCNP-Security, MCNE, MCP
> 3X Corporation
> rfuller@3x.com
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:15 GMT-3