From: Li Chaoyong (hughcyli@xxxxxxxxxxxxxxxxx)
Date: Sat Apr 22 2000 - 07:26:26 GMT-3
RFC 1483 : Multiprotocol over ATM
AAL5SNAP, AAL5MUX is concepts of RFC 1483.
RFC 1577 : Classical IP over ATM.
use ATM ARP SERVER to resolute the IP address.
----- Original Message -----
From: "Erik Belz" <ebelz@mecnet.com>
To: <sfr@ccci.com>; <ccielab@groupstudy.com>; <jkconzone@home.com>
Sent: Saturday, April 22, 2000 7:56 AM
Subject: Re: ATM CLIP ->LS1010 -> LANE
> Yes
>
> RFC1577 Classical IP over ATM
>
>
> Erik C Belz
> Senior systems engineer
> Manchester Equipment Co
> (212)560-5459
>
> >>> "John Conzone" <jkconzone@home.com> 04/21/2000 4:49:51 PM >>>
> Okay, let me take a shot at my own question. Is CLIP Classical IP?
>
> ----- Original Message -----
> From: John Conzone <jkconzone@home.com>
> To: Scott F. Robohn <sfr@ccci.com>; ccielab <ccielab@groupstudy.com>
> Sent: Friday, April 21, 2000 3:53 PM
> Subject: Re: ATM CLIP ->LS1010 -> LANE
>
>
> >
> > Okay, since no one get ridiculed for easy questions, what's CLIP?
> > ----- Original Message -----
> > From: Scott F. Robohn <sfr@ccci.com>
> > To: Kenneth Kriel <kkriel@netscape.net>; ccielab groupstudy
> > <ccielab@groupstudy.com>
> > Sent: Friday, April 21, 2000 12:36 PM
> > Subject: Re: ATM CLIP ->LS1010 -> LANE
> >
> >
> > > Kenneth,
> > >
> > > Answers below...
> > >
> > > Kenneth Kriel wrote:
> > > >
> > > > Ladies and Gentleman,
> > > >
> > > > My mind tells me that question (1) is impossible, but experience has
> > taught
> > > > me not to be so cynical, I hope that someone could answer the
> following
> > two
> > > > questions :
> > > >
> > > > 1. CLIP on 3600 --> LS1010 --> C5K LANE
> > > > Is it possible to test my CLIP config by doing a ping to the C5K int
> sc0
> > > > with a PVC (aal5snap) config on the LANE module ? Is there another
way
> ?
> > >
> > > The LANE module does not support CLIP. It's a _LANE_
> > > module.
> > >
> > > > 2. CLIP on 3600 --> LS1010
> > > > Is there a way to configure CLIP on the LS1010 ? If so how ? any
> > suggestions
> > > > ?
> > >
> > > You can create a subinterface on the LS1010 that can serve
> > > as a CLIP client and/or server:
> > >
> > > int a2/0/0.10 multipoint
> > > ip addr 192.168.1.1 255.255.255.0
> > > atm arpserver nsap <arpserver-nsap> (or 'atm arpserver
> > > self' if you want this to be the ATMARP server)
> > > atm esi-addr 1010.1010.1010.0a
> > >
> > > Assuming the CLIP config on the 3600 is compatible, this
> > > should work. No IRB or BVI's necessary :)
> > >
> > > You could then route from your CLIP network to the ELAN that
> > > has a LEC on the LANE module.
> > >
> > > HTH,
> > > Scott
> > >
> > > >
> > > > I am trying to test and verify my CLIP config on the 3600 but have
> > nothing
> > > > to ping.
> > > >
> > > > Ken
> > > >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:15 GMT-3