From: Erik Belz (ebelz@xxxxxxxxxx)
Date: Fri Apr 21 2000 - 20:56:49 GMT-3
Yes
RFC1577 Classical IP over ATM
Erik C Belz
Senior systems engineer
Manchester Equipment Co
(212)560-5459
>>> "John Conzone" <jkconzone@home.com> 04/21/2000 4:49:51 PM >>>
Okay, let me take a shot at my own question. Is CLIP Classical IP?
----- Original Message -----
From: John Conzone <jkconzone@home.com>
To: Scott F. Robohn <sfr@ccci.com>; ccielab <ccielab@groupstudy.com>
Sent: Friday, April 21, 2000 3:53 PM
Subject: Re: ATM CLIP ->LS1010 -> LANE
>
> Okay, since no one get ridiculed for easy questions, what's CLIP?
> ----- Original Message -----
> From: Scott F. Robohn <sfr@ccci.com>
> To: Kenneth Kriel <kkriel@netscape.net>; ccielab groupstudy
> <ccielab@groupstudy.com>
> Sent: Friday, April 21, 2000 12:36 PM
> Subject: Re: ATM CLIP ->LS1010 -> LANE
>
>
> > Kenneth,
> >
> > Answers below...
> >
> > Kenneth Kriel wrote:
> > >
> > > Ladies and Gentleman,
> > >
> > > My mind tells me that question (1) is impossible, but experience has
> taught
> > > me not to be so cynical, I hope that someone could answer the
following
> two
> > > questions :
> > >
> > > 1. CLIP on 3600 --> LS1010 --> C5K LANE
> > > Is it possible to test my CLIP config by doing a ping to the C5K int
sc0
> > > with a PVC (aal5snap) config on the LANE module ? Is there another way
?
> >
> > The LANE module does not support CLIP. It's a _LANE_
> > module.
> >
> > > 2. CLIP on 3600 --> LS1010
> > > Is there a way to configure CLIP on the LS1010 ? If so how ? any
> suggestions
> > > ?
> >
> > You can create a subinterface on the LS1010 that can serve
> > as a CLIP client and/or server:
> >
> > int a2/0/0.10 multipoint
> > ip addr 192.168.1.1 255.255.255.0
> > atm arpserver nsap <arpserver-nsap> (or 'atm arpserver
> > self' if you want this to be the ATMARP server)
> > atm esi-addr 1010.1010.1010.0a
> >
> > Assuming the CLIP config on the 3600 is compatible, this
> > should work. No IRB or BVI's necessary :)
> >
> > You could then route from your CLIP network to the ELAN that
> > has a LEC on the LANE module.
> >
> > HTH,
> > Scott
> >
> > >
> > > I am trying to test and verify my CLIP config on the 3600 but have
> nothing
> > > to ping.
> > >
> > > Ken
> > >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:15 GMT-3